| |
|
|
|
|
|
Airman PDS185S
185 CFM Air Compressor - # 14
The Airman PDS185S towable air
compressor designed to for economical, yet efficient, operation.
The compressors direct-drive twin-screw end
increases service life while maintaining super low
noise levels. The PDS185S' automatic air bleeder system
promotes safe operation and the strong and lightweight
unibody construction. Diesel powered. |
|
4 Hours / $74
1st Day / $110
Week / $385
|
 |
|
Mitsui PDS90S
90 CFM Diesel Air Compressor - # 9
Lockable instrument panel and side
doors provide security.
Strong and lightweight unibody construction. Quick-glow
automatic cold weather starting system removes guesswork.
Automatic air bleeder system promotes safe operation.
Center point lifting eye supports weight of machine
with full fuel load. Diesel powered. |
|
4 Hours / $56
1st Day / $84
Week / $336
|
 |
|
MMD/or Con X
70 CFM Diesel Air Compressor - # 8
Portable compressor can operate a 60-or 90-lb. class breaker. Delivers 70 cfm at 100 psi; 18-hp Honda V-twin engine with manual and electric start. Automatic speed control. Detachable 5.5-gal. fuel tank. Weighs 298 lbs. Does not require towing |
|
4 Hours / $56
1st Day / $84
Week / $336
|
 |
|
|
Emglo MG8HGA
8P 15 CFM Gas Air Compressor - # 4
When gas-powered units are your
choice, Emglo has the model to suit. Honda engine 8 gallon, single wheel tank design. All models
include automatic throttle idle control that reduces
wear and saves fuel when the compressor is not under
load. |
|
4 Hours / $30
1st Day / $45
Week / $180
|
 |
|
|
Mi-T-M AC1-HE02-05M1
1 1/4 HP Air Compressor - # 2
Hand Carry - 5 Gallon - Electric
- Single Stage. 120 Volt, 15 Amp, 2 HP, 60 Hz Electric Motor, 4.1 CFM at 100 PSI is ideal for small indoor jobs. Thermal overload circuit protects the motor. Includes regulator and 2 gauges for tank and outlet pressure. Start / Stop control set at 95 - 125 PSI
|
|
4 Hours / $20
1st Day / $30
Week / $60
|
 |
|
|
Chipping Hammer - # 19
APT Chipping Hammers are used for scaling, chiseling, removing concrete build-up from the side of cement mixers, light concrete demolition and cement finishing, form stripping, etc.
|
|
4 Hours / $20
1st Day / $30
Week / $120
|
 |
|
30lb Pavement Breaker - # 18 APT Paving Breakers Feature: Automatic valves, Drop forged alloy steel handle, Built-in automatic oiler, Rubber handle grips, Latch type retainer, Swivel hose connection, Four-bolt backhead. 1" tool steel
|
|
4 Hours / $24
1st Day / $36
Week / $144
|
 |
|
60 lb Pavement Breaker - # 16
APT Paving Breakers Feature: Automatic valves, Drop forged alloy steel handle, Built-in automatic oiler, Rubber handle grips, Latch type retainer, Swivel hose connection, Four-bolt backhead. 1" 1/8th tool steel
|
|
4 Hours / $26
1st Day / $38
Week / $152
|
 |
|
80 lb Pavement Breaker - # 15
APT Paving Breakers Feature: Automatic valves, Drop forged alloy steel handle, Built-in automatic oiler, Rubber handle grips, Latch type retainer, Swivel hose connection, Four-bolt backhead
|
|
4 Hours / $26
1st Day / $38
Week / $152
|
 |
|
55 lb Rock Drill - # 17
3 drilling speeds. Built-in automatic oiler, Counter clockwise rotation. 1" Drill Steel
|
|
4 Hours / $37
1st Day / $55
Week / $220
|
 |
|
Darda Rock Drill / Splitter - # 10
Darda splitters break reinforced concrete and all types of rock. No shocks or vibrations. Over 700,000lbs. of breaking force. Controls the direction of the break. Safe, one-man operation. Forced expansion inside the material causes tension. The hydraulic cylinder contains one sliding plug and two feathers. The unit is inserted into a pre-drilled hole with the plug in a retracted position. As the plug advances, the feathers are pushed aside causing the material to split. Recommended for walls, slabs, floors, bridges, dams-any type of rock or concrete work. Excellent in reinforced concrete. Air powered hydraulic power pack. 1 3/4" x 26" hole required. |
4 Hours / $200
1st Day / $300
Week / $1200
|
 |

Betonamit non-explosive cracking agent is a non-toxic powder. When mixed with water and poured into holes 1 1/4", 1 3/8" or 1 1/2" diameter, it hardens and expands, exerting pressures of 12,000 psi. Reinforced concrete, boulders, and ledge are fractured overnight with no noise, vibration, or flyrock.
See a Quicktime demonstration Here. Available in our Store or Delivered with your order. Click Here for the Manual.
|
 |
|
3/4" x 50' Air Hose - # 700
|
|
1st Day / $8
Week / $24
|
 |
|
3/8' x 50' Air Hose - # 701
|
|
1st Day / $5
Week / $15
|
 |
|
300 lb Sandblaster - # 197
Our abrasive blasting systems feature efficient piping designed to provide the industry's lowest pressure drop. Designed with a low profile for easier filling and ample wheel clearance for greater stability when the system is in use.125 psi rated vessel. Pneumatic remote controls, ComboValve & MicroValve, 55' Twinline control hose, Deadman control, A moisture separator, 50' blast hose, nozzle holder and nozzle. |
|
4 Hours / $67
1st Day / $100
Week / $350
|
 |
|
100 lb Sandblaster - # 196
See above. 125 psi rated vessel. Pneumatic remote controls, ComboValve & MicroValve, 55' Twinline control hose, Deadman control, A moisture separator, 50' blast hose, nozzle holder and nozzle. |
|
4 Hours / $40
1st Day / $60
Week / $350
|
 |
|
Air Fed Helmet Kit - # 194
Provides fresh Air while Blasting.
|
|
4 Hours / $30
1st Day / $45
Week / $180
|
 |
|
Blow Gun - # 720
3/4 " with Valve
|
|
4 Hours / $8
1st Day / $12
Week / $27
|
 |
|
Sprinkler Adapter - # 721
An adapter for cleaning out/winterizing your sprinkler system.
|
|
1st Day / $2
Week / $8
|
 |
|
Safety Check Valve - # 722
Prevents Backflow into compressor..
|
|
1st Day / $5
Week / $15
|
 |
|
Line Oiler - # 13 Air line lubricators are devices used to add a lubricant, via an air line, to a compressed air operated appliance; one that requires an external source of pneumatic oil for proper operation.
|
|
1st Day / $2
Week / $6
|
 |
 |
Safety instructions provided. Eye and ear protection recommended. This is only a partial list of what we have available. Prices subject to change without notice. Tax, deposit and delivery not included. All information is for reference purposes only. Please call for availability and specifications. |
| |
|
|
|
Back to Top |
Previous Category |
|
Next Category  |
|
|
|
|
|