|
Dynapac LF90
Plate Compactor 20" - # 228
Ideal for small repair and maintenance
work, such as driveways and pathways, parking lots
and back-filling in trenches. These all-round machines
are specially designed to compact soil in confined
areas, such as in trenches and parking lots, among
other areas. |
|
4 Hours / $50
1st Day / $75
Week / $300
 |
|
|
Dynapac 12" Plate Compactor - # 227
Ideal for small repair and maintenance
work, such as driveways and pathways, parking lots
and back-filling in trenches. These all-round machines
are specially designed to compact soil in confined
areas, such as in trenches and parking lots, among
other areas. |
|
4 Hours / $40
1st Day / $60
Week / $240
|
|
|
Dynapac Reversable Plate Compactor - # 229
The LH300 forward and reversible plate compactor is an heavy-duty plate for soil applications, ideally used for compaction of backfill in pipe and cable trenches, as well as road repair and maintenance work. Speed and compaction depth are regulated steplessly via hydraulic servo control of the eccentric element. This gives the plate smooth motion and makes it very easy to operate. The design includes a strong cover that withstands severe shock and also protects all vital parts of the machine. |
|
4 Hours / $67
1st Day / $100
Week / $400
|
|
 |
Dynapac Rammer "Jumping Jack" - # 309
The Dynapac range of tampers is designed for compacting cohesive soils, such as clay and silt in small repair jobs and in narrow confined areas, such as trenches or housing sites. They are also used for compacting sand and gravel. Easy to operate and feature excellent manoeuvrability in trenches and around pipes. |
|
4 Hours / $54
1st Day / $80
Week / $320
|
|
|
Trench RollerLP8500 - # 188
The LP8500 is a radio remote controlled trench compactor. Its robust design makes it suitable for compaction of cohesive soil, both in confined areas (such as trenches, construction back-fills) and on roads. Sheeps foot style drum.
|
|
4 Hours / $230
1st Day / $350
Week / $1,225
|
|
 |
Dynapac LP6500
Double Drum Walk-Behind Roller - # 187 LP6500 is a duplex roller, ideal for compacting soil and asphalt. The machine is fully hydraulic which allows a small overhang enabling the roller to run close to obstructions, eg, walls. It is equipped with a large watertank, dead-man’s handle and push-stop.
|
|
4 Hours / $110
1st Day / $160
Week / $640
|
|
|
Dynapac 1.5 Ton Ride-On Roller - # 191
A small asphalt roller for small-scale compaction work such as pavements, cycle paths, small roads and small parking areas. CC900G has vibration on the front drum and a static rear drum. Gas Powered. Articulated
|
|
4 Hours / $100
1st Day / $150
Week / $600
|
|
 |
Dynapac CC102 Tandem Asphalt Roller - # 189
3-5 Ton Ride-On Vibratory Roller The CC102 is specially designed for repair work on asphalt compounds, but can also be used for paving small streets, sidewalks and bicycle trails. It's often used as a complement to bigger rollers for compacting cross-joints and restricted spaces Gas Powered. Articulated
|
|
4 Hours / $170
1st Day / $250
Week / $1,000
|
|
|
|
|
Stow Concrete
Mixer 9 Cu. Ft. / Gas - # 53
Features include: New Dumping Mechanism,
High Strength Frame, Rugged Tow Bar, Laser Cut Mixing
Blades, Longer Life Drum, Swing away hood, Cast
Iron Durability, High Speed Roller Bearings, Rubber
Torsion Suspension. |
|
4 Hours / $50
1st Day / $75
Week / $300
|
|
|
Imer Minuteman
Portable Concrete Mixer / Electric - # 49
3 cu. ft. Portable Multimixer. 275 pounds of material per batch! The Minuteman II has an electric motor enclosed in a thermal plastic protective body which is double insulated. Imer's three piece paddles and unique false bottom drum design enable this multimixer to thoroughly mix 200-275 lbs of mortar, stucco, grout or concrete in less than 4 minutes. In just a few minutes the Minuteman can be broken down into 3 easy to load components. Best of all this can be done by one person with no tools. |
|
4 Hours / $28
1st Day / $42
Week / $168
|
|
|
Stone 655PM Mortar Mixer 1 1/2 Bag / Gas - # 54
Deluxe Mid Range 6 cu. ft., 1 1/2
bag capacity - high dump mixer.
Heavy-duty easy-to-cleam poly drum.
Extendible axle (34" to 46"),
High speed 4.80 x 12 (20" dia.) tires,
Rubber blades and safety chain standard. |
|
4 Hours / $50
1st Day / $75
Week / $300
|
|
|
Miller MB16/21
Cu. Ft. Ride-On Concrete Buggy - # 38
2" thick solid plate steel
frame provides unmatched strength and structural integrity,
plus greater durability and ideal weight distribution.The
lower center of gravity and weight distribution provide
excellent traction. Heavy duty semi-enclosed band
brakes are designed to stop the buggy if the engine
loses power or if dynamic braking is lost due to hydraulic
system failure.These brakes will stop the buggy safely
in wet or dry conditions, whether on a level grade
or downhill. |
|
4 Hours / $85
1st Day / $125
Week / $500
|
|
|
Concrete Chute - # 35
12' Sections
|
|
1st Day / $16
Week / $48
|
|
|
|
|
Hand Rebar Bender - # 444
5/8" Bends & Cuts |
|
4 Hours / $18
1st Day / $25
Week / $100
|
|
|
Stow SCT36H80 Power Trowel - # 47
Stow Trowels provide the feel
and features you need for fast, smooth finishing.
Stow trowels consistently out-perform other brands
that cost a great deal more. Each trowel is tested
as it comes off the assembly line to assure you receive
the highest possible level of quality. |
|
4 Hours / $50
1st Day / $80
Week / $320
|
|
|
Power Trowel Float Blades- # 47F
Trowels |
|
1st Day / $16
|
|
|
Crown Power
Screed 10'-12' Gas - # 51
A faster way to screed concrete.
Easy to use and saves time and manpower. Power
bar and power transfer system produces a high frequency
vibration that eliminates the honey comb effect and
speeds finishing time. Allows one person to do the
work of two in less time as compared to traditional
2x4 screeding. |
|
4 Hours / $50
1st Day / $80
Week / $320
|
|
|
Wagman Bull
Float 45" - # 44
With 2' handles. |
|
4 Hours / $12
1st Day / $20
Week / $60
|
|
|
3.2-3
HP Concrete Vibrator 2" Head 14' Shaft - # 48
Runs vibrator heads 11,000
to 12,000 vpm. They never drop below 10,000vpm even
in the lowest slump concrete (near 0) |
|
4 Hours / $37
1st Day / $55
Week / $220
|
|
|
Pencil Vibrator - # 50
Wyco 7/8" Head / 7' Shaft |
|
4 Hours / $32
1st Day / $50
Week / $200
|
|
|
Backpack Vibrator - # 52
Wyco 13/16" Head / 10' Shaft |
|
4 Hours / $44
1st Day / $66
Week / $264
|
|
|
General SG24/E
Electric Floor Grinder HD - # 236
Ideal for breaking up deposits
of grease, dirt, rubber carpet backing and industrial
residues; cleaning concrete, asphalt and tiles; producing
exposed aggregate slabs; and buffing and polishing
delicate terrazzo and marble floor surfaces. Features
twin, counter-rotating discs that can work a 24"x12"
area. |
|
4 Hours / $60
1st Day / $90
Week / $360
|
|
WE SELL GRINDING STONES - DIAMOND GRINDING DISCS - SCARIFIER WHEELS
|
|
|
General Gas Floor Grinder HD #233
Same as above, except gas powered. |
|
4 Hours / $67
1st Day / $100
Week / $400
|
|
|
General SP8/G
8" Gas-powered Surface Planer - # 237
Blades sold separately. High speed,
accurate surface preparation up to 8 inches wide and
5/8 inches deep. Utilizes a wide variety of flail
type cutters to hammer and impact almost any type
of surface. Ideal for milling misaligned sidewalks
and joints, and removing encrusted accumulations on
floors to improve working conditions and safety.
Standard features include a screw type, cutting depth
control, water mist dust control, fitting & vacumn
attachment tube. |
|
4 Hours / $54
1st Day / $80
Week / $320
|
|
|
10" Surface Planer Gas-powered - # 580
Similar to above. Blades sold separately. |
|
4 Hours / $80
1st Day / $120
Week / $480
|
|
|
10" Surface Planer Flail Blade Kit - # 581
Carbide Tipped.
|
|
4 Hours / $80
1st Day / $120
Week / $480
|
|
|
|
|
|
20" Road Saw - # 45
6 5/8" Depth of Cut
Special Heavy Duty Replaceable Blade Guard Hinge,
Adjustable Handles. Gas powered, self propelled..
|
|
4 Hours / $105
1st Day / $160
Week / $640
|
|
|
14" Concrete Saw, Stow - # 46
Compact, lightweight, economical and easy to handle. Gas Powered. Push model.
Blades Rented & Sold
|
|
4 Hours / $60
1st Day / $80
Week / $320
|
|
|
14" Cut Off Saw - Gas - # 283
STIHL's most powerful cut-off machine. Designed for cart use and heavy-duty applications which require greater engine power. The EASYSTART® system with decompression valve and 3-stage air filter is standard. Uses 14" x 20mm Blade |
|
4 Hours / $40
1st Day / $60
Week / $240
|
|
|
12" Cut Off saw - Gas - # 282
From the number one name in cut-off machines worldwide. The differences in the TS 400 are easy to see: extremely long running times, outstanding cutting performance. Use 12" x 20mm Blade |
|
4 Hours / $36
1st Day / $55
Week / $220
|
|
|
12" Cut Off Saw - Electric - # 281
Let’s cut some concrete! You can even cut around those edges of brick on your pool surface to make them even. This powerful 15-amp motor at 5,000 rpm gives high cutting efficiency. The Cut wheel is removable without removal of the base. A wide base is provided so that you have that extra cutting stability. |
|
4 Hours / $32
1st Day / $50
Week / $200
|
|
|
12" Diamond Chain Saw - Gas - # 284
Versatile and easy to use. Deep cuts up to 12 inches. Square corners without over-cuts in material as thick as 10 inches. Irregular shapes. No power pack required. Safe to operate, no “kickback”, Wet-cut, no hazardous dus. tDiamond Blade Sold Separately |
|
4 Hours / $84
1st Day / $125
Week / $500
|
|
| Don't Forget: We Sell & Sharpen Blades and Chain Saw Chains |
Safety instructions provided. Eye and ear protection recommended. This is only a partial list of what we have available. Prices subject to change without notice. Tax, deposit and delivery not included. All information is for reference purposes only. Please call for availability and specifications. |
| |
|
|
|
 Back to Top |
 Previous Category |
|
Next Category  |
|
|
|
|
){kind=small}
