| |
|
|
|
 |
|
|
|
4 Hours / $40
1st Day / $60
Week / $240
|
|
|
|
|
4 Hours / $34
1st Day / $50
|
|
|
Essex-Silverline Sander & Edger Kit - # 1
Floor Drum Sander & Floor Edger 7”
We carry sandpaper, cleaners, polyurethane, and accessories.
|
|
4 Hours / $54
1st Day / $80
Week / $329
|
|
|
|
Essex-Silverline Floor Drum Sander - # 81
The SL-8 features a 1HP constant speed motor, while the slow 1800 RPM constant speed of the drum will not gouge floors. The tilt action of the SL-8 also allows for a more controlled and even sanding. Paper held by velcro. |
|
4 Hours / $36
1st Day / $54
Week / $216
|
|
|
|
Essex-Silverline Floor Edger 7” - # 76
The powerful motor delivers 3600 RPM for the fast smooth cutting. The oversized vacuum fan and chamber work together to achieve superior dust pick. |
|
4 Hours / $21
1st Day / $32
Week / $128
|
|
|
|
Silver-Line U-2 Underadiator Sander - # 68
The Silver-Line U-2 Underadiator Sander is perfect for hard to reach areas. We designed this sander to do the job quickly, easily. |
|
4 Hours / $21
1st Day / $32
Week / $128
|
|
|
|
Essex Silverline Orbital Floor Polisher / Sander - # 326
The SL-1218 is great for screening floors after sanding and screening and recoating polyurethaned floors as well as scrubbing and polishing waxed floors, refinishing wood decks, and maintaining floor tile. |
|
4 Hours / $35
1st Day / $52
Week / $208
|
|
|
|
Floor Buffer 16” - # 80
Powered by a 1.75 hp motor, these heavy duty floor machines deliver 180 rpm and produce an even gloss on hard floors.
|
|
4 Hours / $24
1st Day / $36
Week / $144
|
|
|
Porta Nailer 401 Hardwood Floor Nailer - # 78
The 401 Porta-Nailer is designed for nailing 25/32" and 33/32" Hardwood Tongue and Groove flooring. There is also a new angled shoe base available for use with 401 nailer to nail 3/4" hardwood over 3/4" plywood over concrete. |
|
4 Hours / $20
1st Day / $30
Week / $120
|
|
|
Primatech 240 Pneumatic Floor Nailer - # 77
Operates at 75-80 psi Virtually oil-free. Powerful and smooth - no recoil effect. Can get 2 boards closer to end walls, Extra large head cap - mallet strike can be from any angle. |
|
4 Hours / $25
1st Day / $38
Week / $152
|
|
|
Face Nailer - # 79
For nailing floor close to wall
|
|
4 Hours / $20
1st Day / $30
Week / $120
|
|
|
Laminate Stapler - # 65
for 3/8" Laminate floor.
|
|
4 Hours / $20
1st Day / $30
Week / $120
|
|
| |
|
|
Upright Carpet Cleaner / Extractor - # 628
Perfect size unit for both the homeowner and commercial customers. Can be used on most carpets and upholstery. “Steam” type action deep cleans. |
|
4 Hours / $00
1st Day / $000
Week / $000
|
|
|
Upholstery Tool for Cleaner / Extractor (above) - # 629
|
|
4 Hours / $6
1st Day / $10
Week / $40
|
|
|
|
Canister Carpet Cleaner / Extractor - # 329
Perfect size unit for both the homeowner and commercial customers. Can be used on most carpets and upholstery. “Steam” type action deep cleans. |
|
4 Hours / $20
1st Day / $30
Week / $120
|
|
|
Upholstery Tool for Cleaner / Extractor (above) - # 327
|
|
4 Hours / $6
1st Day / $10
Week / $40
|
|
|
|
Dri-Eaz Turbo Dryer - # 330
The "deluxe" airmover for drying floors and carpets. It boasts a low amp draw of only 4.7 amps, but still provides plenty of power and versatility for every water damage job or carpet cleaning project. |
|
1st Day / $26
Week / $78
|
|
|
Dehumidifier Dri-Eaz 1200 - # 336
The LGR 2800i dehumidifier offers
exceptional performance across the full range of
jobsite conditions – in low humidity environments and
even at high temperatures (up to 125°F). The unit is
engineered for the heavy demands of water damage
restoration.
|
|
4 Hours / $30
1st Day / $45
Week / $180
|
|
|
Dehumidifier - # 67
|
|
4 Hours / $24
1st Day / $36
Week / $144
|
|
|
Ozone Generator / Total Zone - # 333
Total Zone ozone generators are the most modern, technically advanced systems on the market today, cleaning the air naturally - just like a thunderstorm .Neutralize odors. |
|
4 Hours / $34
1st Day / $50
Week / $200
|
|
|
Air Scrubber - # 334
Powerful air scrubber and negative air
machine.
High efficiency air filtration, the maximum clean air
rating from AHAM, and extreme versatility – all with a
small footprint! Uses HEPA 500 filter media with an
efficiency rating of 99.97% against 0.3-micron oily
aerosol particles, and provides 250 to 500 CFM, the
typical airflow level demanded on restoration jobs.
Scrubbing Filters Sold Seperately
Guide to Air Scrubbing <<<click here
|
|
4 Hours / $20
1st Day / $30
Week / $120
|
|
|
|
Carpet Knee Kicker - # 55
The head grips the carpet with a combination of three nap grippes and 16 adjustable steel pins. |
|
1st Day / $14
Week / $42
|
|
|
|
Carpet Iron - # 325
Low profile iron glides easily under carpets to permit "right off the iron" jointing. Heat setting is adjustable from 250 degrees to 350 degrees F. Built-in heat shield protects sensitive pile finish and synthetic bearing. 110 volt/800 watt. |
|
4 Hours / $14
1st Day / $21
Week / $63
|
|
|
|
Carpet Stapler - # 324
. Features a powerful 11 amp solenoid that drives into hardwoods. A low overall height fits under stair risers. The jam-proof magazine holds 100 staples. 11 amps/115 volts. |
|
1st Day / $16
Week / $48
|
|
|
|
Palmer Floor Stripper - # 75
Removes tiles, linoleum, ceramic, adhesives & almost any accumulation from concrete or wood floors and leaves surface smooth and ready for refinishing. Blades available for purchase. |
|
4 Hours / $45
1st Day / $68
Week / $272
|
|
|
|
Tile Wet Saw 10” Blade Target - # 148
Adjustable Cutting Head. High Output Submersible Water Pump. Aluminum Conveyor Cart. Steel Water pan. V-Belt Driven. Folding Steel Stand. Rip Guide. |
|
4 Hours / $47
1st Day / $70
Week / $280
|
|
|
|
250 V Combi Saw (Combination Tile Saw) - # 601
It's pivoting head allows for plunge cutting, door jamb cut outs, and gives 27 inches of cutting length (29" with plunge) yet weighing in at under 85lbs. 10" Blade capacity. Pivoting head for plunge cuts. 1.5 h.p. 110v 14 amp fully enclosed motor. 30" Rip cutting length, at 90 or 45 degrees. Accuracy to 1/32". Head tilts to 45 degrees for precise miter cuts. Diagonal cuts on 20" x 20" tiles or stones. |
|
4 Hours / $28
1st Day / $42
Week / $380
|
|
|
Tile Saw Wet MK - # 149
Tilting head allows for precise 45º miter cuts. Variable height cutting head allows for plunge cutting. Sliding aluminum die-cast cutting table rips 18" tile. Single piece zinc-plated steel frame for rigidity, strength and durability. Hinged blade guard for easy blade changes. Built-in water pump receptacle. |
|
4 Hours / $28
1st Day / $42
Week / $168
|
|
|
|
Linoleum Roller 100 - # 104
Hand roller for install all types of glued floors |
|
1st Day / $16
Week / $64
|
|
|
|
Vinyl/Asphalt Cutter - # 57
The proven asphalt and vinyl tile cutter for the professional. Tile guide for repeat cuts. 12 3/4" blade cuts 12" tile or 9" tile diagonally. |
|
1st Day / $20
Week / $60
|
|
|
Resiliant Tile Cutter - # 146
|
|
1st Day / $000
Week / $000
|
|
|
|
Wet/Dry Shop Vacuum 10 gallon - # 254
Recommended for heavy-duty jobs, the unit has the power for the toughest cleaning applications. Power packed and reliable “work horse” picks up almost any kind of dry debris or liquid. Cartridge style paper filter with a foam prefilter. Easy empy water drain |
|
4 Hours / $24
1st Day / $36
Week / $144
|
|
|
Upright Vacuum - # 251
|
|
4 Hours / $14
1st Day / $21
Week / $63
|
|
Safety instructions available. Eye and ear protection recommended. This is only a partial list of what we have available. Prices subject to change without notice. Tax, deposit and delivery not included. All information is for reference purposes only. Please call for availability and specifications. |
| |
|
|
|
 Back to Top |
 Previous Category |
|
Next Category  |
|
|
|
|
|
