| |
|
|
| This is only a partial list of what we have available. Prices subject to change without notice. Tax, deposit and delivery not included. All information is for reference purposes only. Please call for availability and specifications. |
|
|
Koshin KDP-80H
3" Diaphragm Pump "Mud Sucker"
Quiet and reliable Honda 4 hp overhead
valve engines with a low oil sensor. Straight line
flow design is self cleaning; eliminates clogging.
Pump housings are made of lightweight cast aluminum.
Standard wheel kits provide portability. Pumps is
built to run dry without damage; perfect for areas
of slow seepage. Oil-filled gear reduction means quiet
operation.
|
1st Day / $66
Week / $264
 |
|
|
|
Koshin PB-65011
2" Submersible Pump
Compact size. Cast iron impeller
and pump casings for durability. Strain relief on
the power cord keeps the cord in the pump. Thermal
protector turns off power supply to protect motor
in case of overload. Special oil filled shaft seal
allows for periods of dry running. Environmentally
safe liquid paraffin is used in place of oil. Features
top discharge for greater stability. Flow through
design a smaller diameter housing.
|
1st Day / $36
Week / $114
|
|
|
|
Koshin KTH-80X 3" Trash
Pump Gas
Heavy-duty 3-inch trash pump.
|
1st Day / $66
Week / $264
|
|
|
|
Koshin KTH-50X
2" Trash Pump Gas
Heavy-duty 2-inch trash pump.
|
1st Day / $54
Week / $216
|
|
|
|
Little Giant
6CIA 3/4" Utility Submersible Pump
Automatic Sump Pump 3/10 hp 115V
45 gpm @ 5 ft 8 ft Cord.
|
1st Day / $16
Week / $32
|
|
|
|
Tsurumi 3"
Submersible Pump 110 Volt Electric
Residential, commercial, industrial
dewatering and site drainage. Features: Semi-vortex
Ductile Iron impeller with ethylene propylene casing,
increases wear resistance when pumpage contains abrasive
particles.
|
1st Day / $80
Week / $320
|
|
|
|
Wacker PT4 4" Trash
Pump Diesel
Self-priming high performance
pumps, designed to handle water and solids up to
2". Patented volute insert easily shimmed or
replaced in field. Hardened ductile iron impeller
resists wear providing a long service life. Mixed
flow impeller ,6 design produces higher volume and
head for increased pump performance. Lubricated
mechanical seal reduces maintenance and protects
seal in dry-run conditions. Large diameter fill
and drain plugs conveniently located to speed priming
and draining. Heavy-duty frames with central lifting
point and pneumatic tires combine pump and engine
protection with easy transport.
|
1st Day / $90
Week / $360
|
|
|
|
Wheeler 46453
Hydrostatic Test Pump 300 PSI Gas
10 gpm/400 psi (38 lpm/28 bar),
6.5 hp. B&S engine.
|
1st Day / $75
Week / $300
|
| |
|
|
 Back to Top |
|
Next Category  |
|
|
|
|
